This release gives you a cleaner way to correct accrued interest and record activity across lenders. Accrual adjustments let you book a correction against a lender's accrued interest while Tenor's calculated values stay in place, and Record Activity now posts from Global View, so a syndicated payment goes in once instead of once per lender. Fund operations teams get their own roles, and facilities can now require a second person to approve them before they go live.
Watch this video to learn more about the new features coming on October 29:
Here's a summary of what's new:
- Adjust accrued interest without losing the calculation: Book a signed correction with a required note, and see what makes up every total.
- Record activity across lenders at once: Post interest, fees, cash, principal, paydowns, and funding from Global View and let Tenor split them.
- Require approval before a facility goes live: Turn on Facility Maker/Checker so the person who builds a facility cannot be the one who activates it.
- Grant rate access without admin rights: Two new fund operations roles cover SOFR rate maintenance and nothing else.
- Keep one borrower record per company: Every path that creates a borrower now matches against the ones you already hold.
- Review imported facilities before they go live: Facility imports create drafts rather than activating anything.
- Import a custom principal schedule: Load dated principal payments from a spreadsheet instead of typing each row.
- Additional updates: Rate reset direction, tiered rates at contract creation, and frozen columns on the P&L Report.
Adjust accrued interest without losing the calculation
You can now book a positive or negative adjustment against a lender's accrued interest from the Schedule, with a required note explaining it. Tenor's calculated interest stays exactly as it was, and your adjustment applies on top.
When a lender's accrual needs a true-up at period end, you record the difference rather than replacing Tenor's figure with your own. The calculation stays auditable, and the note travels with the correction, so the next person to open that schedule can see what changed and why.
What's new
- Signed corrections with context: Book a positive or negative amount against one lender, with a required note of up to 500 characters.
- Calculated interest stays put: Daily Interest and Cumulative Interest keep their calculated values, and only the scheduled interest payment reflects your adjustment.
- A new Accrual Adjustment column: See what is pending on the Schedule in both Fund View and Global View, and in Export to XLS.
- Trace any total to its entries: The drawer lists every adjustment making up a pending total, oldest first, with each one's date, amount, and note.
- Revise without losing the original: Select a listed adjustment to load it for editing, and your change is recorded as a new entry.
- One path for interest corrections: Update matrix value no longer appears on interest cells, so corrections go through the accrual adjustment instead.
How it works
Open the Schedule tab in Daily View, right-click a cell in the Accrual Adjustment column, and choose Accrual Adjustment. The drawer opens with the row's date and governing contract already filled in, and on Global View you also pick the lender. Amounts take two decimal places, and the contract list shows only contracts covering the date you select.
Adjustments apply to the first scheduled interest payment on or after the booking date within the same contract, so a correction never crosses into another contract. Two adjustments on different dates in the same period add together, while saving again for the same lender, contract, and date replaces the earlier amount. Tenor rejects a save that would make a scheduled interest payment negative. Read Only users can open the drawer and see the column, the values, and the contributing list, but cannot save. Draft facilities are excluded, as are Excel import and document extraction.
Record activity across lenders at once
Record Activity now posts from the Global Facility Schedule. Enter an amount once at the facility level, review how it splits across lenders, and post the whole thing in one action.
When an interest payment arrives on a syndicated facility, you record it once rather than opening each lender's fund view in turn. Tenor calculates every lender's share from its ownership on the effective date, and you adjust any share that needs to differ before posting.
What's new
- Six activity types: Post Interest, Fee, Cash Received, Principal Payment, Paydown, and Funding from Global View.
- See the split before you commit: The lender allocation grid shows each lender's share, the calculated amount, and the amount that will post, with the running difference shown beneath the grid.
- Override any lender: Enter a different amount for a lender, then revert that one lender, or reset the whole line, to restore the ownership-based split.
- Rounding you can resolve: Where a split does not divide cleanly, Auto-adjust absorbs the break so the lender amounts match the facility amount.
- Unbalanced lines are blocked: A line whose lender amounts do not sum to its facility amount is marked, and posting stays disabled until it balances.
How it works
Open the Schedule tab on a global facility and choose Record Activity, then set the effective date, add your lines, and choose Post activity. The drawer names the types it accepts, so you know before entering amounts. A fee line splits only when every lender on the facility collects that fee type.
Posting is available from the Record Activity button. From the right-click menu on a Global View schedule row, Record Cash Transaction and Edit Cash Transaction open the same drawer, while the remaining commands still point you to fund view. Read Only users do not see the Record Activity button. On a multicurrency revolver whose contract currency differs from the facility currency, post from fund view instead. Locked dates and scenario mode block posting as they do elsewhere.
Require approval before a facility goes live
A new tenant setting, Facility Maker/Checker, makes activating a draft facility an approval step. With it on, the person who created or last edited a facility cannot be the one who activates it.
When a facility is ready to go live, activating it starts real calculation against real money. A second approver reviews that step, which gives you the separation of duties your auditors expect at the point where it matters most.
What's new
- Off until you turn it on: The setting is per tenant and defaults to off, so nothing changes until an admin enables it.
- Approval by role: Only an FA Ops Approver, Tenant Admin, or Super Admin can move a facility from draft to Active Investment.
- No approving your own work: An approver who created the facility, or edited it most recently, is directed to a different colleague.
- Reasons shown up front: On a facility you cannot activate, the Active Investment option is disabled and its tooltip gives the reason.
How it works
Open Settings from the configuration area and switch on Facility Maker/Checker. Only Tenant Admins and Super Admins can see or change it.
Because the approver is determined partly by who last edited the facility, an approver who makes even a small correction to a draft becomes its most recent editor, and a different colleague then needs to activate it. A facility that is not ready for processing cannot be activated by anyone, with or without approval rights.
Grant rate access without admin rights
Two new roles, FA Ops User and FA Ops Approver, cover SOFR rate maintenance without administrative control. The Users screen now uses a single Role dropdown in place of the Is Admin and Is Read Only checkboxes.
When a fund operations analyst maintains SOFR rates, they need the Rates page and nothing else. These roles give them exactly that, rather than the Super Admin rights that also carry tenants, configuration, and user management.
What's new
- Rate maintenance as its own role: FA Ops User and FA Ops Approver carry everything a Regular User has, plus permission to edit SOFR rates.
- One role per user: A single Role dropdown replaces the separate admin and read-only checkboxes, and the Users table shows one Role column.
- Fund access is required: Every role except Admin now needs at least one fund or All Funds Access before it can be saved.
- Rate visibility for Tenant Admins: CME Term SOFR and WSJ Prime are now viewable by Tenant Admins, where both were Super Admin only.
How it works
Open Users from the admin cog to assign a role. Choosing Admin greys out the User Access panel, since an admin implicitly has access to everything.
For FA Ops roles the admin cog opens to Rates alone, with no Tenants, Configuration, or Users. Importing rates and downloading templates remain Super Admin, and CME Term SOFR and WSJ Prime stay view-only for every role. Inviting an email that already exists confirms that user's stored role before proceeding.
Keep one borrower record per company
Tenor now matches borrower names across every path that can create one, so the same company stops appearing more than once with different capitalisation or a stray space.
When an ops user types a borrower that already exists, the deal wizard points them at the existing record instead of creating a second one. The same name arriving through an import or a document extraction attaches to the borrower already on file, so a bulk load does not stall.
What's new
- Three creation paths, one borrower: The deal wizard, deal import, and document extraction all check the name before creating a borrower.
- Matching ignores case and spacing: Leading and trailing spaces are trimmed and capitalisation is disregarded on both sides of the comparison.
- Borrowers are chosen, not typed: The free-text borrower name field is replaced by selection from the list, with an explicit option to add a new one.
- Extraction pre-selects the match: When a document names a borrower you already hold, the Select Borrower field arrives with that borrower chosen.
How it works
The wizard blocks a duplicate and tells you to select the existing borrower, while import and extraction attach to it silently so a run completes. Rows within a single import that differ only in case or spacing resolve to one borrower, even before the import is saved.
Review imported facilities before they go live
Facility imports now create every facility in Draft, whatever the workbook's Status column says, and tell you which rows were affected.
A workbook is usually assembled before terms are final. Importing one that declared facilities active started accruals against figures nobody had checked, and a draft gives you the review step first.
What's new
- Status is not applied on import: A row declaring Active Investment creates a draft facility.
- Affected rows are named: Each one produces a notice giving the facility, the row number, and the status from the workbook.
- A blank status no longer fails: An empty Status cell produces a draft facility instead of a validation error.
How it works
After an import, review the facilities it created and change their status when you are satisfied with the terms. If you import facilities expecting them to be live immediately, that activation is now a step you perform afterwards.
Import a custom principal schedule
The Custom Principal Payments panel on the facility wizard now accepts a spreadsheet of dates and amounts.
When a credit agreement sets out a bespoke amortization with dozens of dated payments, you load the whole schedule from a file rather than entering a row at a time.
What's new
- A template to start from: Download the two-column Date and Amount template and import it as an .xlsx file, the only format accepted.
- The import replaces the panel contents: A successful import asks you to confirm, then swaps in your rows and refreshes the pending balance to allocate.
- Back out an import without losing your own rows: Remove imported clears only the rows that came from the file and leaves anything you typed by hand in place.
- Existing checks still apply: Date range, duplicate dates, required values, and the pending balance are validated exactly as they are for typed rows.
How it works
Open Step 5 of the facility add or edit wizard and set Principal Payments Type to Custom Payment, and Import Excel appears beside the add button. Both facility create and facility edit have it, in Fund View and Global View.
Custom principal rows are held at facility level, so a multi-lender facility splits them by participation on save. You can still edit, add, and delete rows after an import.
Set the direction of a rate reset
A Lookback / Look forward toggle on the facility wizard's Interest step sets whether the benchmark reset date counts backward or forward from the accrual period start.
Where a credit agreement sets the rate a fixed number of business days after the period begins, you model it directly rather than working around it.
What's new
- A direction toggle: Look forward counts the same number of business days forward from the period start, using the existing business-day conventions and holiday calendars.
- Labels follow the direction: Selecting Look forward relabels the days and calendar fields to match.
- Resolved per lender and contract: Each lender and each contract in a sequential chain resolves from its own period start.
How it works
The toggle sits above the days and calendar fields on the Interest step, available when creating a facility and when editing one. On a facility with zero lookback days whose accrual period starts on a weekend or holiday, the date used to look up the rate rolls to the preceding business day under Lookback, or the following business day under Look forward.
Set tiered rates when you add a lineage
The Has Tiered Rates option and the tier table are now available in Add Lineage, not only in Edit Contract.
When a new contract carries tiered pricing, you configure the tiers as you create it rather than saving the contract and reopening it to add them.
What's new
- Tiers persist from creation: Choose Has Tiered Rates in the Add Lineage drawer and the tier set saves with the contract.
- Balances chain automatically: Each new tier takes its lower balance from the previous tier's upper balance, keeping the ranges contiguous.
- Mixed rate types per tier: Each tier carries its own floating or fixed selection, benchmark, spread, floor, cap, and all-in rate.
- Applied across the rollover chain: Every contract generated in the rollover chain receives a copy of the tier set.
How it works
Saving stays disabled until every tier is valid, which means the last tier's upper balance equals the commitment applicable to the contract. A tiered contract reopens in Edit Contract with Has Tiered Rates already on and its saved tiers loaded.
Additional updates
This release also includes a shortcut from the Schedule to contract terms, clearer feedback on deal status changes, and column controls on the P&L Report.
- Open the contract behind a rate: The interest rate on each Schedule row is now a link that opens the contract that governed that row's rate, resolving the correct contract on multi-contract facilities. Where no contract covers a row's date, the rate shows as plain text.
- Clearer deal status changes: Applying a status change to a deal and all its facilities now skips facilities that cannot be activated, such as those not ready for processing, and lists each one with the reason, rather than activating them regardless.
- Keep key columns in view on the P&L Report: Freeze up to five leading columns so fund, borrower, and facility stay visible as you scroll, saved per view and per view mode. The Views control moves beside Export to Excel, and Hide all is now Hide optional.
Was this article helpful?
Still need help?
Contact support